ATLAS EPIROC 6063 ALUMINUM HOLDER PROFILES PATINE PERFIL 3,250MM ALUNINIUM EXTRUDED PROFILES
(I) 405MM LONG holder sets
[A]
HOLDER SET 3128 3061 81 includes
(1) 3128 0784 39 aluminium holder (405mm long)
(2) 3128 3074 88 sliding pieces (2 pieces)
(3) 3128 0619 00 key (6 pieces)
[B]
HOLDER SET 3128 3061 80 includes
(1) 3128 0784 38 aluminium holder (405mm long)
(2) 3128 3074 88 sliding pieces (2 pieces)
(3) 3128 0619 00 key (6 pieces)
***********************************************************
(II) 200MM LONG holder sets
[A]
HOLDER SET 3128 3140 12 includes
(1) 3128 0785 48 aluminium holder (200mm long)
(2) 3128 3039 30 / 3128 3074 88 sliding pieces (1 piece)
(3) 3128 0619 00 key (3 pieces)
[B]
HOLDER SET 3128 3140 13 includes
(1) 3128 0785 49 aluminium holder (200mm long)
(2) 3128 3039 30 / 3128 3074 88 sliding pieces (1 piece)
(3) 3128 0619 00 key (3 pieces)
Aluminium Extruded Profiles Used As Holder For 281 282 JUMBO BOOMER
Aluminium Holder Profiles suitable to produce
3128 0785 48
3128 0785 49
3128 0784 38
3128 0784 39
6063 is often called architectural aluminum for two reasons. First, it has a surface finish that is far smoother than the other commercially available alloys. Second, its strength is significantly less than most other aluminum alloys.
Specifications on High Strength 6063 T6 Extruded Profiles Used As Constructional Wall
Wall Thickness: 18.70mm
Shape: Customized
Length: 4200mm
6063 Typical Chemical Composition % | Weight % | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Each | Total |
| Minimum | 0.20 | | | | 0.45 | | | | | |
| Maximum | 0.60 | 0.35 | 0.10 | 0.10 | 0.90 | 0.10 | 0.10 | 0.10 | 0.05 | 0.15 |
Remainder Aluminum
6063 Typical Mechanical Properties | Temper | Tensile | Hardness |
| | Ultimate | Yield | Elongation | Brinell |
| | KSI | MPA | KSI | MPA | % | |
| T5, T52 | 27 | 186 | 21 | 145 | 12 | 60 |
| T6 | 35 | 241 | 31 | 214 | 12 | 73 |
Product Tags:
|
|
3128 0785 48 AND 3128 0785 49 HOLDER SET 6063 ALUMINUM HOLDER PROFILES PATINE PERFIL 3250MM ALUNINIUM EXTRUDED PROFILES Images
|
